ART エー・アール・ティー 8CH 3分配マイク・スプリッター S8-3Way 【国内正規輸入品】
-
Detail
This unit can distribute 3 inputs for each channel.
8 channel microphone splitter
For live and studio, recording and broadcasting, etc.
Can be used in many occasions.Each channel contains
1 XLR input, 1 XLR direct output,
It has two XLR isolate outputs.Typical uses
The XLR direct output is sent to the main mixer,
XLR isolate output for monitors and
Send to remote recording mixer or broadcastingIf you need a phantom power supply with the condenser microphone,
Supplied via DIRECT OUTPUT (Direct Output) on the front panel.This machine is the same as the popular ART S8,
Equipped with high quality transformers.
The rack mount panels are replaced,
The front and back sides are replaceable, so
Can be used in a variety of ways depending onThe case is made of steel and all passive circuit,
It can be used for a long time.Specifications:
Note: All numbers are isolate output. Input 150Ω balance signal and value at 1KΩ load.
- Frequency response: 20 Hz to 20K Hz, ±0.25 dB @ -15 dBu, -3 dB at approximately 165K Hz
- THD + NOISE:
- 0.26% or less, 20 Hz to 20K Hz @ -15 dBu input
- 0.1% or less, 45 Hz to 20K Hz @ -15 dBu input
- 0.002% Typical@1K Hz, -15 dBu input
- Input and output phase difference: below 10 degrees @ 20K Hz (ref. 1K Hz)
- Input impedance: 1.1KΩ or higher @ 1K Hz (when source impedance is 150Ω)
- Output impedance: 255Ω or less @ 1K Hz (when output load impedance is 1KΩ)
- CMRRR: Above 105 dB @ 60 Hz, 80 dB or higher @ 3K Hz
- Insertion Loss: Approx. 2 dB@1K Hz
- Maximum Input Level (1% THD): -1.4 dBu@20 Hz, +3.5 dBu@30 Hz, +9.4 dBu@50 Hz
- Dimensions: 1.7 x 19.1 x 3.7 inches (44.5 x 482.6 x 95 mm).
- Weight: 3.7 lbs (1.7 kg).
- Ref:0 dBu = 0.775 VRMS
-
Customer ReviewsNo comments